JOEY MkI           
CCIR493 Selcall & ECCM Frequency Hopping Controller for ICOM tranceivers.
<< BACK
Embedded Selcall and FH controller for ICOM radios
Adds Barrett HF Selcall & Frequency Hopping to your ICOM  


Joey with ICOM interface lead.



Price from $250.00ea  GST free, including interface Lead . 

JOEY Operating & Install instructions DOC 500kb

JOEY Operational Video 1      JOEY Operational Video 2    
JOEY Operational Video 3 


 Dept of Defence has granted Joey export approval. Joey export units have the Hop Bandwidth limited to 50kHz.                              


Selcall Functions:
    *  Adds CCIR493 4 digit HF Selcall encoding and decoding capability to ICOM transceivers.
    *  Responds to incoming selcalls with a revertive tone and blinking display LEDS and audio tone.
    *  The Senders selcall number is stored in the receiving ICOM radio, and the time in minutes since the selcall.
    *  On receipt of a selcall, transmits a local area alert on a VHF or UHF frequency (IC706, IC7000 etc) .
    *  Adds Codan syle Roger Beep when PTT is released (emulates an NGT).
    *  Supports, Selcall, Beacon Call, Status call & request, GPS call & request and Telcall.
       
    

Hopping Functions:
*     The hop rate is user configurable between 1 to 10 hops/sec.
*     Hop band shape optimised for mobile whip antennas. 
*     Over-the-air-sync Tone Sync frequency hopping mode is supported.
*     If a UBLOX NEO6,7 or 8 GPS is connected, full stealth GPS synced frequency hopping mode is supported.
      The easy to use GPS  frequency hopping mode requires no central synchronisation station, has no entry or late entry time delay and requires no handshaking.

*    JOEY hopping modes are compatible with SKIPPY hopping modes.







JOEY Embedded in an IC706  to make a fully self contained Selcall and Frequency Hopping solution.







Joey is not too difficult to solder into the radio, connects to the back of the 13Pin DIN and CAT connectors.
 

And not limited to the HF bands......1000khz wide hop band on Six-Meters is not a problem.



                   JOEY now comes with a plug and play radio interface lead.





 
                 JOEY                      v799
MEM39    6.000 kHz Load my GPS position
                 6.100 kHz send selcall, beacon etc
                 6.200 kHz Start Tone Hop
                 6.300 kHz Start GPS Hop
                 6.400 kHz  Scan Mode
MEM 40    Selcall Numbers
MEM 41     Home channel.    Scan 1                
MEM42- MEM45    Scan  2,  3,  4,  5
MEM 46     s/ware version
MEM 47    Who called.
MEM 48     Hop Rate   eg 1000006 = 6 hops/sec
MEM 49     VHF revertive frequency

MEM 51    1000000          Selcall  
MEM 51    1000001          Beacon
MEM 51    1000002          Send GPS
MEM 51    1000003          GPS Req
MEM 51    1000004          Stat Req
MEM 51    1000006          Telcall  04xxxxxxxx
MEM 51    1000007    Hop band 4 khz wide
MEM 51    1000008    Hop band 50khz wide
MEM 51    100001x    Supress Roger Beep
MEM 51    100002x    Logging Mode On
MEM 51    10001xx    Fast Bootup
MEM 52    Last 8 digits of mobile phone number

           If a GPS is connected to JOEY

MEM 60

My Altitude

MEM 61

My Latitude

MEM 62

My Longitude

MEM 63

Target Latitude

MEM 64

Target Longitude

MEM 65

Range to Target in cm

MEM 66

Bearing to Target

 




NEW  Joey accessories which may be of interest:  Joey Accessories





Australian Customers only:  $250.00 for one JOEY Mk1 unit & interface lead, with free postage within VK:
Units are available for immediate dispatch.




International Customers only:  $275.00 for one JOEY Mk1 unit & interface lead, with free international postage :
Units are available for immediate dispatch.




International Customers only:  $525.00 for two (a pair) JOEY Mk1 units & interface leads, with free postage :
Units are available for immediate dispatch.









Joey Enquires:

syntor@lizzy.com.au
codan selcall barrett selcall selective calling ccir 493-4 ccir 493 ale icom ic706 selcall 4 digit selcall vks737 4wd network RFDS jenal q-mac marine land HF